Tender

Tuesday, 04 September 2018 13:29

PGSR-3i ‘Beagle’

PGSR-3i 'Beagle'

PORTABLE GROUND SURVEILLANCE RADAR

PGSR-3i Beagle

PGSR-3i ‘Beagle’ is a unique lightweight man-portable radar, which is capable of intercepting, detecting and tracking targets moving on or close to the ground. It can also classify and differentiate targets based on their size and movement characteristics.

BENEFITS

check

5 minutes to set up and ready for operation

check

standalone or network usage

check

covers areas hardly approachable by vehicles

check

easy integration into systems

READ MORE

check

mountable on vehicles

READ MORE

check

low weight, small dimensions

WIDE RANGE OF USAGE

The radar is a versatile, cost-effective solution offering a multitude of advantages making it an ideal choice for border guard, battlefield surveillance, civilian and military installation security and combat operations duties.

PGRSR-3i ‘Beagle’ can be carried in backpacks by two-man teams to cover areas hardly approachable by vehicles.

It is also mountable on vehicles and on field posts as needed. It can be used as a standalone unit or in a network of radars as required by the specifics of the surveillance scenario. The radar is very durable, capable of withstanding a wide range of environmental factors and is also very reliable, with only a minimal chance of malfunctioning (MTBF > 10000 hours). Due to its operating principles PGSR-3i ‘Beagle’ has minimal possibility of being jammed or intercepted (LPI - Low Probability of Intercept).

OVERVIEW

The highly advanced DSP technologies integrated in PGSR-3i ‘Beagle’ differentiate between moving and stationary targets; determine the exact parameters of the detections and control the adaptive surveillance parameters during changing environmental conditions. The radar is controlled from the operator unit or command center. The radar’s control software is capable of utilizing various map formats and displaying the detected targets over the map. The software is designed in a user friendly way, it is easy to use even for untrained operators. The software supports the integration of this single radar into complex multisensor systems. Every surveillance data and user interaction is recorded and can be replayed for further analysis.

TECHNICAL PARAMETERS

SURVEILLANCE AND DATA PROCESSING
Detection Ranges
Scanning Modes
Scan Rate
Accuracy
Detectable Radial Velocity
Target Capacity
Other Features
 
Pedestrian | (RCS 0.5 m²) | 8 km
Soldier | (RCS 1 m²) | 10 km
Vehicle | (RCS 10 m²) | 15 km
Large vehicle | (RCS 50 m²) | 24 km
Sector Scan (6° – 346°)
Continuous Rotation (n x 360°)
7°/sec or 14°/sec
Range: 3 m at 3 km range
Azimuth: ≦ 0.3°
from 1.0 km/h at 7°/sec scan rate
from 1.7 km/h at 14°/sec scan rate
10 plots / sec
Track While Scan, Clutter map, Spot Window, Doppler Audio, Automatic Classification, LPI, STC, CFAR

TECHNICAL PARAMETERS
Operation Principle
Frequency Band
Transmitted Power
Power Requirements
Continuous Operation on One Set of Batteries
Temperature Ranges
Environmental Specifications
System Weight*
Radar Unit Size*
MTBF
Data/Control Interface
 
FMCW
X Band (NATO I/J Band)
max. 2W
28 V DC (22 – 33 V DC), max. 50 W
10 - 12 h
Operation: -32°C to +50°C
Storage: -40°C to +60°C
Tested according to MIL-STD-810G
30 kg
69 x 47 x 13 cm
> 10 000 hrs
RS-485, Ethernet

FURTHER FEATURES
Integrated GPS and North Finding Device
Low Radiated Power for Human Safety
Comprehensive BIT
32 Fixed channel and automatic hopping
Controller software: Freely Configurable Alarm and Dumb Zones, Map Handling, Fully Logged Operation and Replay, over 300 displayed tracks and 1000 displayed plots

ACCESSORIES
Tripod
Power Adapter
Network Connection Adapter
Rechargeable Batteries and Battery Charger
Operator unit with 230 VAC and Vehicle Chargers
Transportation Cases and Backpack System

IMAGE GALLERY

Published in Radar
Tuesday, 04 September 2018 13:43

Vehicle Mounted Ground Surveillance System

MGS3 ‘Scout’

VEHICLE MOUNTED GROUND SURVEILLANCE SYSTEM

MGS3 Scout

The MGS3 ‘Scout’ Vehicle is a mobile surveillance unit offering a unique cost-efficient defense solution providing an increased capability of early threat recognition and improved perimeter control.

BENEFITS

check

Vehicle mounted multisensor system

check

Common user interface with multiple display units

check

Easy to deploy / pack

check

Long time surveillance scenarios

check

Cost efficient

check

Covert surveillance equipment

WIDE RANGE OF USAGE

MGS3 ‘Scout’ is designed for long range security patrols, for controlling large areas and defending mobile targets, and for situations where security demands a perpetual adaptation of reconnaissance patterns. The operators of an MGS3 ’Scout’ will be able to quickly redefine the boundaries of the controlled area to instantly react to any situation that may arise.

OVERVIEW

The MGS3 ’Scout’ is a vehicle equipped with a number of surveillance modules, a PGSR-3i ‘Beagle’ radar unit, an electro optical sensor array and a Command Center.
The PGSR-3i ‘Beagle’ provides continuous observation of a large area detecting any movements, while the electro optical sensor array provides detailed picture of any detected targets for accurate identification useable in both day and night operation.
The electro optical head and the radar are mounted on retractable masts. The vehicle is assembled with a leveling system in order to stabilize and level the sensors. The high capacity battery system provides enough power for long time surveillance scenarios, but the working hours can be extended by a backup generator.The operating platform, Pro Patria Electronics’ unique Adaptive Multisensor System, presents an easy to operate user interface, offering the possibility of multi-tasking and educated decision-making to the operator. The software is capable of utilizing different map formats and displaying the detected targets over the map. The video of the cameras and the control functions are also integrated into the same system proving even automatic slew-to-cue functions. Every surveillance data and user interaction is recorded and can be replayed for further analysis.

TECHNICAL PARAMETERS

GENERAL HARDWARE SETUP AND CHARACTERISTICS
Instrumentation
Vehicle options
Power supply
 
PGSR-3i ’Beagle’ radar unit
Electro-Optical Sensor Array (EOSA)
Masts
Leveling system
Command center
Other instruments as needed
Any vehicle as needed
Vehicle-built-in battery set (24V DC) for 4-8 hours battery operation
Power generator and charger (230V AC)

PGSR-3i ‘Beagle‘
Detection Ranges
Scanning Modes
Scan Rate
Accuracy
Detectable Radial Velocity
Target Capacity
Other Features
Environmental Specifications
 
Pedestrian | (RCS 0.5 m²) | 8 km
Soldier | (RCS 1 m²) | 10 km
Vehicle | (RCS 10 m²) | 15 km
Large vehicle | (RCS 50 m²) | 24 km
Sector Scan (6° – 346°)
Continuous Rotation (n x 360°)
7°/sec or 14°/sec
Range: 3 m at 3 km range
Azimuth: < 0.3°
from 1.0 km/h at 7°/sec scan rate
from 1.7 km/h at 14°/sec scan rate
10 plots / sec
Track While Scan, Clutter map, Spot Window, Doppler Audio, Automatic Classification, LPI, STC, CFAR
Tested according to MIL-STD-810G

EOSA 225 (Option A)
Thermal Imager
Thermal Engine
Spectral Band
NETD
Lens F#
Focal Length
Field of View
Daylight Camera
Effective Pixels
Focal Length
Field of View
Pan and Tilt
Pan Range
Tilt Range
Position Accuracy
Pan/Tilt angular speed
Environmental Specifications
 

17μm 640 x 480 pixels
7.5 – 14μm (Uncooled)
lower than 50° mK
f / 1.5
25 – 225 mm (Continuous)
24.5° to 2.77°

752 x 582 pixels
10 – 320 mm (Continuous)
35.3° to 1.1°

360 Continuous
± 45°
± 1.5 mRad
0.1°/s to 50°/s
MIL-STD-810G

EOSA 275 (Option B)
Thermal Imager
Thermal Engine
Spectral Band
NETD
Lens F#
Focal Length
Field of View
Daylight Camera
Effective Pixels
Focal Length
Field of View
Pan and Tilt
Pan Range
Tilt Range
Position Accuracy
Pan/Tilt angular speed
Environmental Specifications
 

15μm 640 x 512 pixels
3 – 5μm(Cooled)
lower than 25° mK
f / 5.5
19 – 275 mm (Continuous)
29.8° to 2.0°

752 x 582 pixels
10 – 320 mm (Continuous)
35.3° to 1.1°

360 Continuous
± 45°
± 1.5 mRad
0.1°/s to 50°/s
MIL-STD-810G

SPECIAL FEATURES
-Display and Control sensors from one user interface
-Support of multiple monitors and split screens
-Record and replay of all displayed data
-Automatic optical target follow
-Periodic polling of optical marker points

Tuesday, 04 September 2018 13:43

Mid-Range Multi-Sensor System

PMS2 ‘Sentinel’

MID-RANGE MULTI-SENSOR SYSTEM

PMS2 Sentinel

The PMS2 ‘Sentinel’ is offering a lightweight, cost-efficient and easy to deploy solution optimized for silent battery operation with long runtime. The system provides a very good Return of Investment solution for the user.


BENEFITS

check

Man-portable multi-sensor system

check

‘Slew to Cue’
functionality

check

Long time surveillance scenarios

check

Quick deployment

check

Rugged design

check

Cost-efficient solution

OVERVIEW

The system integrates two surveillance sensors, a PGSR-3i ‘Beagle’ Radar unit and an Electro-Optical Sensor Array.
The PGSR-3i ‘Beagle’ provides continuous observation of a large area detecting any movements, while the Electro-Optical Sensor Array provides detailed image of any detected targets for accurate identification useable in both day and night operation. The Electro-Optical Sensor and the Radar are mounted on their individual tripods and connected to the Operator Unit via cables and interface boxes. The standard military batteries provide enough power for 8 hours surveillance scenarios, but the independent operating time can be extended with extra battery sets or vehicle generator/battery.

The operating platform is the Pro Patria Electronics Ltd developed ADAMS (ADAptive Multisensor System), and provides an easy-to-operate user interface, offering the possibility of multi-tasking and educated decision-taking for the operator. The software is capable of utilizing different map formats and displaying the detected targets over the map. The video of the cameras and the control functions are also integrated into the same system proving automatic Slew to Cue functions. Surveillance data and user interaction is recorded and can be replayed for further/later analysis.

TECHNICAL PARAMETERS

GENERAL HARDWARE SETUP AND CHARACTERISTICS
Instrumentation
Power Requirements
 
PGSR-3i ’Beagle’ radar unit
Electro-Optical Sensor Array (EOSA)
PGSR-3i ‘Beagle’:
22 - 33 VDC, max. 60 W
Thermal Camera option A:
18 - 28 VDC, 30 W typical, max. 350 W
Thermal Camera option B:
24 VDC, 30 W typical, max. 390 W

PGSR-3i ‘Beagle‘
Detection Ranges
Scanning Modes
Scan Rate
Accuracy
Detectable Radial Velocity
Target Capacity
Other Features
Environmental Specifications
 
Pedestrian | (RCS 0.5 m²) | 8 km
Soldier | (RCS 1 m²) | 10 km
Vehicle | (RCS 10 m²) | 15 km
Large vehicle | (RCS 50 m²) | 24 km
Sector Scan (6° – 345°)
Continuous Rotation (n x 360°)
7°/sec or 14°/sec
Range: 3 m at 3 km range
Azimuth: < 0.3°
from 1.0 km/h at 7°/sec scan rate
from 1.7 km/h at 14°/sec scan rate
10 plots / sec
Track While Scan, Clutter map, Spot Window, Doppler Audio, Automatic Classification, LPI, STC, CFAR
Tested according to MIL-STD-810G

EOSA 225 (Option A)
Thermal Imager
Thermal Engine
Spectral Band
NETD
Lens F#
Focal Length
Field of View
Daylight Camera
Effective Pixels
Focal Length
Field of View
Pan and Tilt
Pan Range
Tilt Range
Position Accuracy
Pan/Tilt angular speed
Environmental Specifications
 

17μm 640 x 480 pixels
7.5 – 14μm (Uncooled)
lower than 50° mK
f / 1.5
25 – 225 mm (Continuous)
24.5° to 2.77°

752 x 582 pixels
10 – 320 mm (Continuous)
35.3° to 1.1°

360 Continuous
± 45°
± 1.5 mRad
0.1°/s to 50°/s
MIL-STD-810G

EOSA 275 (Option B)
Thermal Imager
Thermal Engine
Spectral Band
NETD
Lens F#
Focal Length
Field of View
Daylight Camera
Effective Pixels
Focal Length
Field of View
Pan and Tilt
Pan Range
Tilt Range
Position Accuracy
Pan/Tilt angular speed
Environmental Specifications
 

15μm 640 x 512 pixels
3 – 5μm(Cooled)
lower than 25° mK
f / 5.5
19 – 275 mm (Continuous)
29.8° to 2.0°

752 x 582 pixels
10 – 320 mm (Continuous)
35.3° to 1.1°

360 Continuous
± 45°
± 1.5 mRad
0.1°/s to 50°/s
MIL-STD-810G

SPECIAL FEATURES
-Display and Control sensors from one user interface
-Support of multiple monitors and split screens
-Record and replay of all displayed data
-Automatic optical target follow
-Periodic polling of optical marker points
EOSA Type and manufacture to be tailor-made to customer’s needs, typical long range configurations are above.

IMAGE GALLERY

Tuesday, 04 September 2018 13:41

Electro Optical Surveillance System - EOSA 225

EOSA 225

ELECTRO OPTICAL SURVEILLANCE SYSTEM

EOSA 225

EOSA 225 is a market-leading mid-range dual-sensor surveillance system. This unique system combines an advanced high-resolution uncooled thermal continuous zoom camera with a mid-range visible-light camera on an accurate pan-tilt unit. The EOSA 225 offers mid-range detection and assessment without requiring regular maintenance, ensuring low cost of ownership. Typical applications for this system include airports and other sensitive installations.

This camera was integrated with PPE ADAMS Sensor Management System and developed to work with PGSR-3i Beagle radars.

BENEFITS

check

Dual Continuous Zoom Channels (Thermal & Color)
Independent continuous zoom thermal and color cameras provide maximum situational awareness, user friendliness, and 24/7 threat assessment.

check

Mid-Range Thermal Imagers
Uncooled thermal cameras provide long range performance with no routine preventive maintenance.

check

Ruggedized for Harsh Environments
A rugged design, certified to IP66, and protected against hot, cold, dusty, and other harsh or industrial environments.

check

Easy Integration
Serial or TCP/IP configurations. Pelco D and ONVIF Profile S Compliant (TCP/IP only).

AVAILABLE CONFIGURATIONS


Thermal Imager:

17μ: 640 x 480 (NTSC/PAL).

Visible Imager

1/2” color CCD camera.

Visible Optic Features:

- Image Stabilization
- Infrared Cutfilter Removal.

Additional Options

Thermal Image Stabilization.

Thermal Optics:

Continuous Zoom 25-225mm.

Visible Optics:

Continuous Zoom 10 - 320mm.

Video Streaming (TCP/IP):

Multiple, configurable streams in H.264 and MJPEG

Analog or TCP/IP


EOSA 225 CAMERA PERFORMANCE

EOSA225

EOSA 225 SPECIFICATIONS

EOSA 225
 
Imager Type
Resolution
Sensitivity
Video Output
Imager Features
Continuous Zoom Lenses
 
Uncooled Thermal
Uncooled 17µ Microbolometer 7.5-14µ
17µ: 640 x 480
NETD: < 50° mK
RS-170 (30Hz) / CCIR (25Hz)
Motorized Focus, Autofocus on Demand, Polarity, NUC, Image flip, Manual gain/level, Optical & Digital Zoom
25 - 225mm: 24.5° - 2.8° HFOV
 
Visible
1/2” Color CCD
768 x 494
>50dB S/N
NTSC (30Hz) / PAL (25Hz)
12x Digital Zoom & Autofocus
10 - 320mm (32x): 35.3° - 1.1° HFOV (1/2”)

System Specifications
Unit Dimensions
Unit Weight
Environmental Rating
Certifications
Power Input
Power Consumption
Operating Temperature
Communication Protocol
Control Connection
Accuracy
Pan Range
Tilt Range
Pan Speed
 
Dependent on configuration - see system specifications
Dependent on configuration - see system specifications
IP66
CE, FCC
18 - 28V DC
30w typical; 350w max
-40° to +60° C (-40° to + 140° F )
Pelco D, Vumii, ONVIF Profile S (TCP/IP)
Serial: RS422/RS485 or TCP/IP
+/- 1.5 mRad
360° Continuous
-90° to +90°
Variable Speed, 0.1° - 50°/sec

*Nominal values may change depending on configuration. Comment: Detection ranges have been determined without taking into account the atmospheric conditions.

IMAGE GALLERY

Published in Electro optic
Tuesday, 04 September 2018 13:41

Electro Optical Surveillance System - EOSA 275

EOSA 275

ELECTRO OPTICAL SURVEILLANCE SYSTEM

EOSA 275

EOSA 275 family of long-range surveillance cameras combines two advanced video channels on an integrated ruggedized 360° pan-tilt positioner to deliver 24/7 covert security.

This camera was integrated with PPE ADAMS Sensor Management System and developed to work with PGSR-3i Beagle radars.

KEY BENEFITS

check

Dual Continuous Zoom Channels (Thermal & Color)
Independent continuous zoom thermal and color cameras provide maximum situational awareness, user friendliness, and 24/7 threat assessment.

check

Long Range Thermal Optics
Cooled thermal cameras provide Johnson’s Criteria Detection beyond 20km.

check

Ruggedized for Harsh Environments
A rugged design, certified to IP66, and protected against hot, cold, dusty, and other harsh or industrial environments.

check

Easy Integration
Serial or TCP/IP configurations. Pelco D and ONVIF Profile S Compliant (TCP/IP only).

AVAILABLE CONFIGURATION

EOSA 275 Imagers:

Cooled 15µ: 640 x 512, Visible 1920 x 1080

Continuous Zoom Optics:

19 - 275mm, 10 - 320mm

Analog or TCP/IP

Major Components:

- CCD Camera / Lens - Color (Day) Camera and lens
- Thermal (Night) Camera for IR Imaging
- Thermal Camera Lens - Continous Options
- Pan/Tilt Positioner - High accuracy pantilt unit
- Optional GPS module
- Optional Laser Range Finder (Class 1 Safety Rating) Min/Max Range: 5 / 8000 meters Range Accuracy: +/- 5 meters

EOSA 275 CAMERA PERFORMANCE

EOSA275

EOSA 275 SPECIFICATIONS

 
Imager Type
Resolution
Sensitivity
Video Output
Imager Features
Continuous Zoom Lenses
Cooled Thermal
Cooled 15µ InSb 3-5µ
15µ: 640 x 512
NETD: < 25° mK
RS-170 (30Hz) / CCIR (25Hz)
Motorized Focus, Autofocus on Demand, Polarity, NUC, Image flip, Manual gain/level, Optical & Digital Zoom
25 - 225mm: 24.5° - 2.8° HFOV
Visible
1/2” Color CCD / FHD CMOS
1920 x 1080
>50dB S/N
NTSC (30Hz) / PAL (25Hz) 
12x Digital Zoom & Autofocus
10 - 320mm (36x): 35.3° - 1.1° HFOV

System Specifications
Unit Dimensions
Unit Weight
Environmental Rating
Certifications
Power Input
Power Consumption
Operating Temperature
Communication Protocol
Control Connection
Accuracy
Pan Range
Tilt Range
Pan Speed
 
Dependent on configuration - see system specifications
Dependent on configuration - see system specifications
IP66
CE, FCC
24V DC
30w typical; 390w max
-40° to +60° C (-40° to + 140° F )
Pelco D, ONVIF Profile S, Vumii
Serial: RS422/RS485 TCP/IP
+/- 1.5 mRad
360° Continuous
-90° to +90°
Variable Speed, 0 - 50°/sec max
*Nominal values may change depending on configuration. Comment: Detection ranges have been determined without taking into account the atmospheric conditions.

IMAGE GALLERY

Published in Electro optic
Tuesday, 04 September 2018 13:42

Adaptive Multisensor System

ADAMS

ADAPTIVE MULTISENSOR SYSTEM

ADAMS

The Adaptive Multisensor System integrates a wide range of surveillance sensors such as radars, thermal imagers, video cameras and other devices into one complex but easily usable system.

While the radars provide continuous observation of a large area detecting any movements, the electro optical sensor arrays provide detailed picture of any targets for accurate identification.
The software layer of the ADAMS is a Windows® operating system based application, fully controllable by one operator. The software uses map based visualization which presents the geo-located sensors, detected targets and Points of Interest with easily understandable, user friendly icons. The controller software provides enhanced situational awareness by integrating several devices, such as radars and electro-optical sensors into a complex but easily usable multisensor system. The adaptive algorithms couple the different devices and provide a smooth slew to cue operation. The scalable network architecture allows sensors to distribute their data to multiple clients and provides remote control functionality. All radar detections, classified tracks, video frames and operator interactions are automatically recorded and can be easily replayed by the software.

BENEFITS

check

Wide range of integrated devices

check

Smooth slew to cue (camera) operation

check

Scalable network architecture
range

check

Intuitive, easy to learn graphical user interface with user friendly icons

check

Large range of raster and vector map formats (Geo Tiff, DTED, SHP, geo referenced images)

check

Fully logged operation and replay

check

Easy to integrate into more complex C4i systems.

WIDE RANGE OF USAGE

check

Radar

Our ‘Beagle’ and ‘Beagele FT’ radars are capable of detecting and recognizing moving targets on or close to the ground. The high tech DSP technologies can differentiate between moving and stationary targets. Based on the state-of-art technology, our radars can determine the exact parameters of the detected targets; can track and classify the movements even in changing environmental conditions.

READ MORE

check

Thermal Camera

Thermal cameras provide an easily understandable view of the observed area even at poor visibility conditions. These cameras are detecting the thermal radiation of the observed objects, humans and animals. Thermal cameras can be used in darkness and actually at all weather conditions, the cooled models are useable in foggy and rainy environment, while the uncooled ones are more fit to see through smoke.

READ MORE

check

Video Camera

These devices are providing the well known visual image of the observed area. The wide zoom capability enables the user to see the same image in the optical range as the thermal imager presents, but the user can see the overview of the area. The high tech algorithms provide automatic target following, classification and alarm to the user.

READ MORE

check

Others

Our system is capable to control and process data from sensors which are using different operation principles. We can handle acoustic and seismic sensors, optical or microwave barriers, motion detectors, etc. These products can complete the capabilities of the electro-optical sensors and can fulfill special requirements.

READ MORE

CONTROL SOFTWARE


Software Architecture
The basic software of the control system is the Sensor Manager Server (SMS) that performs direct communication with the connected sensors and forwards their output data. Visualization is realized in the Sensor Control Interface (SCIN) that displays data delivered by SMS in required format and provides full sensor control functionality from this surface. The SMS can serve several SCINs and the SCIN can control a number of SMSs. So the sensors distributed over the surveillance area can not only be directly controlled by their dedicated operator unit but also can be addressed and requested by a remote control center or other remote sites.

Special Features

check

Display and Control sensors from one user interface

check

Support of multiple monitors and split screens

check

Record and replay of all displayed data

check

Automatic track forming and classification

check

Automatic optical target following

check

Periodic polling of optical marker points

check

Visualization of targets by icons

check

Access by authorization levels

IMAGE GALLERY

Published in Software