Tender
Tuesday, 04 September 2018 13:29
PGSR-3iFT ’Beagle’
PGSR-3iFT ’Beagle’
TOWER-MOUNTED GROUND SURVEILLANCE RADAR
PGSR-3iFT ’Beagle’ is a tower-mounted radar for detection, tracking and classification of targets moving on or close to the ground.
PGSR-3iFT ’Beagle’ is a member of our fix radar family together with the coastal sea surveillance radar. It was designed for desert and harsh environment operation. It is placed inside a hermetically sealed Radom to withstand extreme weather and environmental challenges..
BENEFITS
Remote operation with IP communication
Intelligent ruling element in sensor system
Long detection range
Integration with C4i systems, local operation
Key element of large border security systems
WIDE RANGE OF USAGE
OVERVIEW
TECHNICAL PARAMETERS
SURVEILLANCE AND DATA PROCESSING
Detection Ranges
Scanning Modes
Scan Rate
Accuracy
Detectable Radial Velocity
Target Capacity
Other Features
Pedestrian | (RCS 0.5 m²) | 8 km
Soldier | (RCS 1 m²) | 10 km
Vehicle | (RCS 10 m²) | 15 km
Large vehicle | (RCS 50 m²) | 24 km
Soldier | (RCS 1 m²) | 10 km
Vehicle | (RCS 10 m²) | 15 km
Large vehicle | (RCS 50 m²) | 24 km
Sector Scan (6° – 346°)
Continuous Rotation (n x 360°)
Continuous Rotation (n x 360°)
7°/sec or 14°/sec
Range: 3 m at 3 km range
Azimuth: ≦ 0.3°
Azimuth: ≦ 0.3°
from 1.0 km/h at 7°/sec scan rate
from 1.7 km/h at 14°/sec scan rate
from 1.7 km/h at 14°/sec scan rate
10 plots / sec
Track While Scan, Clutter map, Spot Window, Doppler Audio, Automatic Classification, LPI, STC, CFAR
TECHNICAL PARAMETERS
Operation Principle
Frequency Band
Transmitted Power
Power Requirements
Selectable output channels
Operation
Environmental Specifications
Control levels
MTBF
Data/Control Interface
FMCW
X Band (NATO I/J Band)
max. 2W
28 V DC (22 – 33 V DC), max. 50 W
32
Continous 365/24
Tested according to MIL-STD-810G
Automatic, autonomous, local control, remote control
> 10 000 hrs
RS-485, Ethernet
FURTHER FEATURES
Low Radiated Power for Human Safety
Comprehensive BIT
32 Fixed channel and automatic hopping
Controller software: Freely Configurable Alarm and Dumb Zones, Map Handling, Fully Logged Operation and Replay, over 300 displayed tracks and 1000 displayed plots
BORDER SURVEILLANCE & ALARM SYSTEM
Multiple connected Beagle FT radars provide hermetical protection against illegal border crossers
Radars and cameras mounted on towers
Integrated in system: local, medium size or C4I
Thermal and daylight camera ranges are matched to radar range
IMAGE GALLERY
Published in
Radar
Tagged under
Saturday, 23 November 2019 17:31
Firecam
FIRECAM
LONG RANGE DUAL CHANNEL E/O SURVEILLANCE SYSTEMS
PPE’s Firecam is a market-leading long range dual-sensor electro-optical surveillance system. This unique system combines an advanced high-resolution uncooled continuous zoom thermal camera with a long range daylight camera on an accurate pan-tilt unit.
The Firecam offers best in its class detection and recognition without the required regular maintenance, ensuring low cost of ownership.Typical applications for this system include fixed installation, vehicle integration for forward observation, artillery fire correction, surveying borders, airports, refineries, power plants, and other sensitive installations. This camera is integrated with ADAMS Sensor Management System. The Ethernet interface makes it easy tointegrate into existing or new third party systems as well.
BENEFITS
Dual Continuous Zoom Channels (Thermal & Color)
Independent continuous zoom thermal and color cameras provide maximum situational awareness, user friendliness, and 24/7 threat assessment.
Long Range Thermal Imagers
Uncooled thermal cameras provide long range performance without routine preventive maintenance and without the noise of the cooler.
Ruggedized for Harsh Environments
A rugged design, certified to IP66, and protected against dusty and other harsh or industrial environments.
Easy Integration
TCP/IP communication, ONVIF Profile.
AVAILABLE CONFIGURATIONS
Thermal Imager:
12μ: 640 x 512 or 1280x1024Visible Imager
1/2.8” (4K option 1/2.3”) Exmor R color CMOS cameraVisible Optic Features:
- Image Stabilization- Infrared Cut Filter Removal
- 2x Focal Range Extender Option
Additional Options
Platform Stabilization OptionThermal Optics:
17um equivalent focal range: 57-420mm Continuous zoomVisible Optics:
Up to 30x Continuous Optical ZoomVideo Streaming (TCP/IP):
Independent video streams, 1 stream configurable for picture in picture, Encoding in H.264, H265 or MJPEGTCP/IP
100/1000 EthernetFIRECAM SPECIFICATIONS
THERMAL CAMERA SPECIFICATION
Pixel size
Resolution
Wavelength
Refresh rate
NETD (F/1, at room temperature)
Field of view
Maximum aperture
Operation
12um
640x512 (1280x1024 option)
8-12um
30 FPS, 9 FPS (NLR)
<60mK (40 or 50mK option)
1.47° - 10.97° (2.94°-21.94° optional)*
F1.5
Motorized continuous zoom and focus
Target
Max detection range
Max recognition range
Max identification range
1.8x0.5m human
11850m**
3950m
1950m
2.3x2.3m NATO
28000m**
9550m
4750m
*Equivalent to a 57-420mm focal length 17um pixel size camera
** Maximum may be limited by the athmosphere.
4K DAYLIGHT CAMERA SPECIFICATION (OPTIONAL)
Resolution
Refresh rate
Maximum sensitivity
Maximum sensitivity
Optical zoom
Field of view
FoV with 2x option
Operation
3840x2160
1..29.97 FPS (4K), 1..60 FPS (FHD)
0.4 Lux (30 FPS)
0.06 Lux (4 FPS)
20x
4.1° - 70.2°
2.1° - 10°
Motorized continuous focus and zoom, 12x digital zoom, AE, AF AWB, Defog, Enhance, B&W, IR
Target
Max detection range
Max recognition range
Max identification range
1.8x0.5m human
24650m
8200m
4100m
2.3x2.3m NATO
59800m
19900m
9900m
GNSS (GNSS BASED COMPASS OPTION)
GNSS
Number of concurrent GNSS
GNSS BANDS
BeiDou, Galileo, GLONASS, GPS/QZSS
4
L2OF, L2C, E1B/C, B2I, E5B, L1C/A, L10F, B1L
FHD DAYLIGHT CAMERA SPECIFICATION
Resolution
Refresh rate
Maximum sensitivity
Signal to noise
Optical zoom
Field of view
FoV with 2x option
Operation
1920x1080
1..60 FPS
0.01 Lux (30 FPS)
<50dB
30x
2.3° - 63.7°
1.2° - 10°
12x digital zoom, AE, AF AWB, B&W, IR
Target
Max detection range
Max recognition range
Max identification range
1.8x0.5m human
22660m
7550m
3770m
2.3x2.3m NATO
55900m
18300m
9150m
LRF SPECIFICATION
Maximum range
2.3x2.3m NATO target
1x1m human target
Accuracy (80% range)
Repetition rate (range)
Wavelength
Divergence
Multiple detection
Eye safety
Pointer (optional)
Pointer eye safety
22000m
10500m
5100m
1m
1Hz (100%), 5Hz (80%), 10Hz (70%)
1550nm
0.5 mrad
max 5 target
Class 1
830nm
Class 1 / Class 3B
SYSTEM SPECIFICATION
Power supply
Power consumption (static/max)
Horizontal movement
Vertical movement
Positioning accuracy
Environmental specification
Interface
Temperature range
Weight
28V DC
15W/80W
infinite, 360°
-90° - +90°
<0.25 mrad
IP66
Ethernet
-20°C to +60°C
30 kg
Nominal values may change depending on configuration.
Comment: Detection ranges have been determined without taking into account the atmospheric conditions.
© 2019 Pro Patria Electronics. All rights reserved. This document may not be copied in any form without permission from Pro Patria Electronics.
Information in this document is subject to change without notice. Firecam is a trademark of Pro Patria Electronics. All other trade and service marks are the property of their respective holders.
Published in
Electro optic
Tagged under
Sunday, 24 November 2019 07:23
Coolcam
COOLCAM
LONG RANGE DUAL CHANNEL E/O SURVEILLANCE SYSTEMS
Coolcam is a market-leading long range dual-sensor electro-optical surveillance system. This unique system combines an advanced high-resolution cooled continuous zoom thermal camera with a long range daylight camera on an accurate pan-tilt unit.
The Coolcam offers best in its class detection and recognition with prolonged maintenance intervalls, ensuring low cost of ownership. Typical applications for this system include fixed installation, vehicle integration for forward observation, artillery fire correction, surveying borders, airports, refineries, power plants, and other sensitive installations.This camera is integrated with PPE ADAMS Sensor Management System. The Ethernet interface makes it easy to integrate into existing or new third party systems as well.
BENEFITS
Dual Continuous Zoom Channels (Thermal & Color)
Independent continuous zoom thermal and color cameras provide maximum situational awareness, user friendliness, and 24/7 threat assessment.
Long Range Thermal Imagers
Cooled thermal cameras provide the highest range performance. This camerra has prolonged maintenance cycle cooler.
Ruggedized for Harsh Environments
A rugged design, certified to IP65, and protected against dusty and other harsh or industrial environments.
Easy Integration
TCP/IP communication
AVAILABLE CONFIGURATIONS
Thermal Imager:
10μ, 1024 x 768Visible Imager
Exmor R color CMOS cameraVisible Optic Features:
-Image Stabilization- Infrared Cut Filter Removal
Additional Options
Platform Stabilization OptionThermal Optics:
20x continuous optical zoomVisible Optics:
Up to 30x Continuous Optical ZoomVideo Streaming (TCP/IP):
Encoding in H.264, or MJPEGTCP/IP
100/1000 EthernetCOOLCAM SPECIFICATIONS
THERMAL CAMERA SPECIFICATION
Pixel size
Resolution
Wavelength
Refresh rate
NETD (F/1, at room temperature)
Field of view
Maximum aperture
Operation
Target
Max detection range
Max recognition range
Max identification range
10um
1024x768 (min)
3.7-4.2um (or greater MWIR)
30 FPS
<25mK
0.75° - 16°
F4
Motorized continuous zoom and focus, 16x digital zoom, AE, AF
1.8x0.5m human
14500m
7500m
3700m
LRF SPECIFICATION
Maximum range
2.3x2.3m NATO target
Accuracy (80% range)
Repetition rate (range)
Wavelength
Divergence
Multiple detection
Eye safety
Pointer (optional)
Pointer eye safety
10500m
5100m
1m
1Hz (100%), 5Hz (80%), 10Hz (70%)
1550nm
0.5 mrad
max 3 target
Class 1
830nm
Class 1 / Class 3B
FHD DAYLIGHT CAMERA SPECIFICATION
Resolution
Refresh rate
Maximum sensitivity
Signal to noise
Optical zoom
Field of view
Operation
Target size
Max detection range
Max recognition range
Max identification range
1920x1080
30 FPS
0.1 Lux (25 FPS)
>50dB
30x
0.7° - 21°
16x digital zoom, AE, AF AWB, B&W, NIR
1.8x0.5m human
14500m
7500m
3700m
GNSS (GNSS BASED COMPASS OPTION)
GNSS
Concurrent GNSS
GNSS BANDS
Sensitivity
BeiDou, Galileo, GLONASS, GPS/QZSS
yes
L1, L2
-145dBm (minimum)
SYSTEM SPECIFICATION
Power supply
Power consumption (static/max)
Horizontal movement
Vertical movement
Positioning accuracy
Environmental specification
MTBF
Interface
Temperature range
Weight
28V DC
15-35W/200W
infinite, 360°
-45° - +45°
<0.25 mrad
IP65
>15100h
Ethernet
-32°C to +55°C
30 kg
Nominal values may change depending on configuration.
© 2019 Pro Patria Electronics. All rights reserved. This document may not be copied in any form without permission from Pro Patria Electronics. Information in this document is subject to change without notice. Coolcam is a trademark of Pro Patria Electronics. All other trade and service marks are the property of their respective holders.
Published in
Electro optic
Tagged under
Sunday, 24 November 2019 12:35
Bordercam
BORDERCAM
MID-RANGE DUAL CHANNEL E/O SURVEILLANCE SYSTEMS
Bordercam is a market-leading mid-range dual-sensor electro-optical surveillance system. This unique system combines an advanced high-resolution uncooled continuous zoom thermal camera with a mid-range daylight camera on an accurate pan-tilt unit.
The Bordercam offers best in its class detection and recognition without the required regular maintenance,ensuring low cost of ownership. Typical applications for this system include fixed installation, vehicle integration or man portable operation for forward observation, surveying borders, airports, refineries, power plants, and other sensitive installations.This camera is integrated with ADAMS Sensor Management System. The Ethernet interface makes it easy to integrate into third party systems as well.
BENEFITS
Dual Continuous Zoom Channels (Thermal & Color)
Independent continuous zoom thermal and color cameras provide maximum situational awareness, user friendliness, and 24/7 threat assessment.
Mid-Range Thermal Imagers
Uncooled thermal cameras provide midrange performance without routine preventive maintenance and without the noise of the cooler.
Ruggedized for Harsh Environments
A rugged design, certified to IP66, and protected against dusty, and other harsh or industrial environments.
Easy Integration
TCP/IP interface
AVAILABLE CONFIGURATIONS
Thermal Imager:
12μ: 640 x 512 Optional: 1280 x 1024Visible Imager
Exmor R color CMOS cameraVisible Optic Features:
-Image Stabilization- Infrared Cut Filter Removal
Additional Options
Platform Stabilization OptionThermal Optics:
17um equivalent focal range: 35-320mm Continuous zoomVisible Optics:
Up to 30x Continuous Optical ZoomVideo Streaming (TCP/IP):
4 independent video streams, 1 stream configurable for picture in picture, Encoding in H.264, H265 or MJPEGTCP/IP
100/1000 EthernetBORDERCAM SPECIFICATIONS
THERMAL CAMERA SPECIFICATION
Pixel size
Resolution
Wavelength
Refresh rate
NETD (F/1, at room temperature)
Field of view
Maximum aperture
Operation
12um
640x512
8-12um
30-60 FPS, 9 FPS (NLR)
<50mK
1.96° - 17.46° *
F1.5
Motorized continuous focus and zoom
Target
Max detection range
Max recognition range
Max identification range
1.8x0.5m human
8894m**
2965m
1482m
2.3x2.3m NATO
21563m**
7188m
3594m
*Equivalent to a 35-320mm focal length 17um pixel size camera
** Maximum may be limited by the athmosphere
LRF SPECIFICATION
Maximum range
2.3x2.3m NATO target
1x1m human target
Accuracy (80% range)
Repetition rate (range)
Wavelength
Divergence
Multiple detection
Eye safety
Pointer (optional)
Pointer eye safety
8000m
5200m
3000m
1m
1Hz (100%), 5Hz (80%), 10Hz (70%)
1550nm
0.5 mrad
max 5 target
Class 1
830nm
Class 1 / Class 3B
FHD DAYLIGHT CAMERA SPECIFICATION
Resolution
Refresh rate
Maximum sensitivity
Signal to noise
Optical zoom
Field of view
Operation
1920x1080
1..60 FPS
0.01 Lux (30 FPS)
>50dB
30x
2.3° - 63.7°
12x digital zoom, AE, AF AWB, B&W, IR
Target
Max detection range
Max recognition range
Max identification range
1.8x0.5m human
13330m**
3775m
1885m
2.3x2.3m NATO
27950m**
9150m
4575m
*Equivalent to a 35-320mm focal length 17um pixel size camera
** Maximum may be limited by the athmosphere
GNSS (GNSS BASED COMPASS OPTION)
GNSS
Number of concurrent GNSS
GNSS BANDS
BeiDou, Galileo, GLONASS, GPS/QZSS
4
L2OF, L2C, E1B/C, B2I, E5B, L1C/A, L10F, B1L
SYSTEM SPECIFICATION
Power supply
Power consumption (static/max)
Horizontal movement
Vertical movement
Positioning accuracy
Environmental specification
Interface
Temperature range
Weight
Size
28V DC
15/80W
infinite, 360°
-90° - +90°
<0.25 mrad
IP66
Ethernet
from -20°C to +60°C
21 kg
567mmx313mmx318mm
Nominal values may change depending on configuration.
© 2019 Pro Patria Electronics. All rights reserved. This document may not be copied in any form without permission from Pro Patria Electronics. Information in this document is subject to change without notice. Coolcam is a trademark of Pro Patria Electronics. All other trade and service marks are the property of their respective holders.
IMAGE GALLERY
Published in
Electro optic
Tagged under
Tuesday, 04 September 2018 13:42
Adaptive Multisensor System
ADAMS
ADAPTIVE MULTISENSOR SYSTEM
The Adaptive Multisensor System integrates a wide range of surveillance sensors such as radars, thermal imagers, video cameras and other devices into one complex but easily usable system.
While the radars provide continuous observation of a large area detecting any movements, the electro optical sensor arrays provide detailed picture of any targets for accurate identification.The software layer of the ADAMS is a Windows® operating system based application, fully controllable by one operator. The software uses map based visualization which presents the geo-located sensors, detected targets and Points of Interest with easily understandable, user friendly icons. The controller software provides enhanced situational awareness by integrating several devices, such as radars and electro-optical sensors into a complex but easily usable multisensor system. The adaptive algorithms couple the different devices and provide a smooth slew to cue operation. The scalable network architecture allows sensors to distribute their data to multiple clients and provides remote control functionality. All radar detections, classified tracks, video frames and operator interactions are automatically recorded and can be easily replayed by the software.
BENEFITS
Wide range of integrated devices
Smooth slew to cue (camera) operation
Scalable network architecture
range
Intuitive, easy to learn graphical user interface with user friendly icons
Large range of raster and vector map formats (Geo Tiff, DTED, SHP, geo referenced images)
Fully logged operation and replay
Easy to integrate into more complex C4i systems.
WIDE RANGE OF USAGE
Radar
Our ‘Beagle’ and ‘Beagele FT’ radars are capable of detecting and recognizing moving targets on or close to the ground. The high tech DSP technologies can differentiate between moving and stationary targets. Based on the state-of-art technology, our radars can determine the exact parameters of the detected targets; can track and classify the movements even in changing environmental conditions.
READ MORE
Thermal Camera
Thermal cameras provide an easily understandable view of the observed area even at poor visibility conditions. These cameras are detecting the thermal radiation of the observed objects, humans and animals. Thermal cameras can be used in darkness and actually at all weather conditions, the cooled models are useable in foggy and rainy environment, while the uncooled ones are more fit to see through smoke.
READ MORE
Video Camera
These devices are providing the well known visual image of the observed area. The wide zoom capability enables the user to see the same image in the optical range as the thermal imager presents, but the user can see the overview of the area. The high tech algorithms provide automatic target following, classification and alarm to the user.
READ MORE
Others
Our system is capable to control and process data from sensors which are using different operation principles. We can handle acoustic and seismic sensors, optical or microwave barriers, motion detectors, etc. These products can complete the capabilities of the electro-optical sensors and can fulfill special requirements.
READ MORECONTROL SOFTWARE
Software Architecture
The basic software of the control system is the Sensor Manager Server (SMS) that performs direct communication with the connected sensors and forwards their output data. Visualization is realized in the Sensor Control Interface (SCIN) that displays data delivered by SMS in required format and provides full sensor control functionality from this surface. The SMS can serve several SCINs and the SCIN can control a number of SMSs. So the sensors distributed over the surveillance area can not only be directly controlled by their dedicated operator unit but also can be addressed and requested by a remote control center or other remote sites.
Special Features
Display and Control sensors from one user interface
Support of multiple monitors and split screens
Record and replay of all displayed data
Automatic track forming and classification
Automatic optical target following
Periodic polling of optical marker points
Visualization of targets by icons
Access by authorization levels
IMAGE GALLERY
Published in
Software
Tagged under
Copyright © 2019 propatria-inc.com. All rights reserved.
Privacy Policy | Adatvédelmi Tájékoztató
Privacy Notice for Recruitment | Munkaerő-felvételi eljárásra vonatkozó Adatvédelmi Tájékoztató
Privacy Policy | Adatvédelmi Tájékoztató
Privacy Notice for Recruitment | Munkaerő-felvételi eljárásra vonatkozó Adatvédelmi Tájékoztató