Mid-Range Multi-Sensor System

PMS2 ‘Sentinel’

Monday, 09 April 2018 15:48 Written by

MID-RANGE MULTI-SENSOR SYSTEM

PMS2 ‘Sentinel’

The PMS2 ‘Sentinel’ is offering a lightweight, cost-efficient and easy to deploy solution optimized for silent battery operation with long runtime. The system provides a very good Return of Investment solution for the user.

BENEFITS

-Man-portable
-multi-sensor system
-‘Slew to Cue’ functionality
-Long time surveillance scenarios
-Quick deployment
-Rugged design
-Cost-efficient solution

OVERVIEW

The system integrates two surveillance sensors, a PGSR-3i ‘Beagle’ Radar unit and an Electro-Optical Sensor Array.
The PGSR-3i ‘Beagle’ provides continuous observation of a large area detecting any movements, while the Electro-Optical Sensor Array provides detailed image of any detected targets for accurate identification useable in both day and night operation. The Electro-Optical Sensor and the Radar are mounted on their individual tripods and connected to the Operator Unit via cables and interface boxes. The standard military batteries provide enough power for 8 hours surveillance scenarios, but the independent operating time can be extended with extra battery sets or vehicle generator/battery.

The operating platform is the Pro Patria Electronics Ltd developed ADAMS (ADAptive Multisensor System), and provides an easy-to-operate user interface, offering the possibility of multi-tasking and educated decision-taking for the operator. The software is capable of utilizing different map formats and displaying the detected targets over the map. The video of the cameras and the control functions are also integrated into the same system proving automatic Slew to Cue functions. Surveillance data and user interaction is recorded and can be replayed for further/later analysis.

TECHNICAL PARAMETERS

GENERAL HARDWARE SETUP AND CHARACTERISTICS
Instrumentation
Power Requirements
 
PGSR-3i ’Beagle’ radar unit
Electro-Optical Sensor Array (EOSA)
PGSR-3i ‘Beagle’:
22 - 33 VDC, max. 60 W
Thermal Camera option A:
18 - 28 VDC, 30 W typical, max. 350 W
Thermal Camera option B:
24 VDC, 30 W typical, max. 390 W

PGSR-3i ‘Beagle‘
Detection Ranges
Scanning Modes
Scan Rate
Accuracy
Detectable Radial Velocity
Target Capacity
Other Features
Environmental Specifications
 
Pedestrian | (RCS 0.5 m²) | 8 km
Soldier | (RCS 1 m²) | 10 km
Vehicle | (RCS 10 m²) | 15 km
Large vehicle | (RCS 50 m²) | 24 km
Sector Scan (6° – 345°)
Continuous Rotation (n x 360°)
7°/sec or 14°/sec
Range: 3 m at 3 km range
Azimuth: < 0.3°
from 1.0 km/h at 7°/sec scan rate
from 1.7 km/h at 14°/sec scan rate
10 plots / sec
Track While Scan, Clutter map, Spot Window, Doppler Audio, Automatic Classification, LPI, STC, CFAR
Tested according to MIL-STD-810G

EOSA 225 (Option A)
Thermal Imager
Thermal Engine
Spectral Band
NETD
Lens F#
Focal Length
Field of View
Daylight Camera
Effective Pixels
Focal Length
Field of View
Pan and Tilt
Pan Range
Tilt Range
Position Accuracy
Pan/Tilt angular speed
Environmental Specifications
 

17μm 640 x 480 pixels
7.5 – 14μm (Uncooled)
lower than 50° mK
f / 1.5
25 – 225 mm (Continuous)
24.5° to 2.77°

752 x 582 pixels
10 – 320 mm (Continuous)
35.3° to 1.1°

360 Continuous
± 45°
± 1.5 mRad
0.1°/s to 50°/s
MIL-STD-810G

EOSA 275 (Option B)
Thermal Imager
Thermal Engine
Spectral Band
NETD
Lens F#
Focal Length
Field of View
Daylight Camera
Effective Pixels
Focal Length
Field of View
Pan and Tilt
Pan Range
Tilt Range
Position Accuracy
Pan/Tilt angular speed
Environmental Specifications
 

15μm 640 x 512 pixels
3 – 5μm(Cooled)
lower than 25° mK
f / 5.5
19 – 275 mm (Continuous)
29.8° to 2.0°

752 x 582 pixels
10 – 320 mm (Continuous)
35.3° to 1.1°

360 Continuous
± 45°
± 1.5 mRad
0.1°/s to 50°/s
MIL-STD-810G

SPECIAL FEATURES
-Display and Control sensors from one user interface
-Support of multiple monitors and split screens
-Record and replay of all displayed data
-Automatic optical target follow
-Periodic polling of optical marker points
EOSA Type and manufacture to be tailor-made to customer’s needs, typical long range configurations are above.

Read 1668 times Last modified on Friday, 29 June 2018 08:34
  • Könyves Kálmán krt. 12-14
    BUDAPEST, H-1094
    HUNGARY
  • +36 1 322 7010
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

Contact Us

Pro Patria Electronics
Pro Patria Electronics is acting as developer and manufacturer of surveillance equipment and as system integrator, delivering products and services to the global law-enforcement and homeland security community.

Form by ChronoForms - ChronoEngine.com